| |
| ANSYS AI*Environment可連結各種CAE與CAD軟體，它結合了ICEM CFD的網格產生技術與ANSYS公司本身的有限元素卓越能力，為專業的CAE前後處理器(pre- and post-processer)。ANSYS AI*Environment可修正CAD幾何模型、產生或修改元素網格、給定邊界條件等，在完成有限元素模型後，最後輸出檔案給予各類CAE軟體以完成分析計算。(ANSYS AI*Environment前後處理器並不含求解功能) |
| |
| ANSYS Mesh Morpher直接針對元素與節點做編輯與修改，不必依靠CAD幾何外形，也就是說，使用者可以直接在有限元素網格做設計變更與分析(如下圖)，不必經由更改CAD外形後再重新產生網格。這種方法對於CAE工程師來說是一大福音，因為建立網格模型的時間可以明顯減少，對於產品設計變更的不同方案，只須修正網格即可，不必重新建模。 |
| |
| ANSYS Mesh
Morpher功能 |
| |
| Transformations |
| |
•Group definitions
•Translations, rotations and scaling on vertices, edges or surfaces
•Projection on target surfaces (with optional Geometry Module)
•Bounding box deformations
•Sweep Transformations for surfaces, edges and vertices maks transformations easier for complex geometries
•Preview of a transformation for verification and acceptance or UNDO |
| |
| Parameterization |
| |
•Each transformation is associated to a parameter
•Mesh generation for any parameter combination
•Analysis of the mesh quality before and after modifications |
| |
| Mesh Morpher Import/Export |
| |
| Finite Element Software |
| |
•ABAQUS
•ANSYS
•NASTRAN
•PATRAN
•Fluent
•Star-CD |
| |
| Note: Full compatibility between input and output files. Only nodal coordinates are modified |
| |
| Mesh Morpher Target Geometry Import Options |
| |
•IGES
•STEP
•TETIN |
| |
| Coupling |
| |
| The output of Mesh
Morpher or ParaBatch can be combined with any existing optimization products (ANSYS Optimization, ANSYS PDS, BOSS Quattro, modeFRONTIER, Isight, Optimus, and SOL200, …) |
| |
| Customization |
| |
| ANSYS, Inc. will adapt
Mesh Morpher to a specific case (custom input/output, special functions…) |
